95-110025-1 – Textron Aviation OEM Wing Spar Fitting Flat Washer
Available now on the Airparts.aero Marketplace.
Overview
The Textron Aviation 95-110025-1 is a genuine OEM, flight-critical wing spar fitting washer, an essential structural component for a wide range of Beechcraft Baron, Bonanza, and King Air aircraft. This is not a standard washer; it is a precision-manufactured, load-bearing component engineered to be part of the primary wing-to-fuselage attachment assembly. Fabricated from high-tensile strength steel and plated for corrosion resistance, its sole purpose is to distribute the immense clamping force of the main wing spar bolts, ensuring the integrity of one of the most critical structural joints on the entire airframe.
Key Features
- Primary Structural Component: Specifically designed for the wing spar attachment point, a joint that transfers all aerodynamic lift, G-forces, and turbulence-induced stress from the wing to the fuselage.
- High-Tensile Steel Construction: Manufactured from a specific high-strength steel alloy and heat-treated to achieve the immense compressive strength required to resist deformation and crushing under the high clamp loads of the spar bolts.
- Precision-Ground Surfaces: The bearing surfaces are precision-ground to be perfectly flat and parallel. This is critical for ensuring a uniform distribution of clamping force, which prevents stress concentrations and is fundamental to the fatigue life of the joint.
- Corrosion-Resistant Plating: Plated with a durable cadmium finish. This protective coating is essential for preventing corrosion on the high-strength steel, ensuring the long-term, airworthy integrity of the wing attachment point.
- Genuine Textron OEM Part: As a genuine factory component, it guarantees conformance to the exact material specifications, heat treatment, and dimensional tolerances of the original aircraft Type Certificate. For a component this critical, there is no substitute.
Technical Specifications
- Part Number: 95-110025-1
- Component Type: Structural Wing Spar Fitting Flat Washer
- Material: High-Tensile, Heat-Treated Steel Alloy
- Finish: Cadmium Plated
- Dimensions:
- Inside Diameter (I.D.): Approximately 0.843 inches
- Certification: FAA Production Approval with full material and process traceability.
Aircraft Compatibility
The 95-110025-1 is the specified OEM washer for the wing spar attachment on some of the most successful and legendary piston and turboprop aircraft ever built.
- Primary Aircraft Models:
- Beechcraft Baron: Baron Series B55, E55, 58 or G58
- Beechcraft Bonanza: 36, F33, G33, F33A or F33C
- Beechcraft King Air: 100, C90, C90A, C90GT or E90 Series
Applications
The 95-110025-1 has a singular, profoundly important application:
- Wing Spar Attachment: Serves as the critical interface between the main wing spar attachment bolt/nut and the wing spar or fuselage fitting. It distributes the immense clamping force and provides a perfect bearing surface.
- Mandatory Inspection & Replacement: This component must be meticulously inspected for any signs of cracking, corrosion, galling, or deformation any time the wing bolts are removed for scheduled inspection or maintenance. It is a mandatory replacement item if any defects are found.
Why Choose 95-110025-1?
The joint connecting the wing to the fuselage is the most critical structural connection on any aircraft. Its integrity is absolute and non-negotiable. The 95-110025-1 washer is an engineered part of this system. Using a genuine Textron Aviation OEM part is the only way to ensure the component has the certified material strength and precise dimensions to handle the calculated flight loads. The use of any non-approved hardware in this location would be a gross violation of safety and airworthiness standards.
Website Metadata
- Meta Title: 95-110025-1 Textron Beechcraft Wing Spar Washer | OEM | Airparts.aero
- Meta Description: Purchase the genuine Textron Aviation 95-110025-1, a flight-critical, high-strength steel washer for the wing spar attachment on Beechcraft Baron, Bonanza, and King Air aircraft.
- SEO and Plain Text Keywords: 95-110025-1, Textron Aviation parts, Beechcraft parts, King Air parts, Bonanza parts, Baron parts, wing spar washer, structural washer, aircraft washer, flight critical hardware, OEM Beechcraft parts, Airparts.aero.
Order Your 95-110025-1 Wing Spar Washers Now
Ensure the structural integrity of your aircraft with genuine, factory-certified, flight-critical hardware. Visit Airparts.aero to order your Textron Aviation 95-110025-1 wing spar fitting washers today.
SEO-Enhanced Addendum
The 95-110025-1 washer is a key element in a high-clamp, friction-type structural joint. When the massive spar bolts are torqued to their specified, extremely high value, they stretch elastically, creating an immense clamping force that presses the wing spar fitting and the fuselage fitting together. The primary mechanism that transfers flight loads is the friction generated between these clamped surfaces. The 95-110025-1 washer's role is to provide a perfectly flat, parallel, and incompressible bearing surface under the bolt head and nut, ensuring this clamping force is distributed evenly across the joint. Any deformation or "cupping" of the washer would lead to a loss of bolt preload, compromising the frictional capacity of the joint and allowing micro-movements that could lead to catastrophic fatigue failure.
